My old stock that boss.
Really really short butt length, got mine 31mm longer just past the 3 with Gemini on.

Hope he makes it through Customs he got stopped 5 hrs ago.

Hi Peter,

The hand grip is more confortable with these mods, with the hand that rests on the bottom and the thumb that can ideally position it is a big plus in standing position :D

For the alu stock model also, it's very great for find the good position of the hamster in all the positions and...

Wont make a scrap of difference if worn or not, in fact better that it has worn with no restrictions.
By putting that cap head in - hammer's hitting cocking link in turn knocking on cap head.

I usually do a double mod, certainly the HFT ones - done of yours Admin, possible first one is as well but...

No that isn't what I have, as you stated mine is much longer / thinner. I'd say mine is about 18-20cm long and about 2.5cm in diameter.

I know that he has made 3 that I'm aware of for the 800x, here is a image of a pink one he done for one of the girls where I shoot.

Junk the screw type method, its just a simple drill and tap 3 minutes rather than make it properly.
Find them way too low when fully closed up only need 1/2 below cradle, above adds about 2 1/2 closed up leads to instability.

Needs a proper clamp method of attachment like the bipod.

No problem between us friends, your humor is my favorite :lol:

And for the wheel I agree with you.. is the next step

Impressed with the inletting Juan very rare to see anything done like that from anyone certainly above two names.
Shaping looks very good too, probably comes down to his shotgun days with fit and feel the prerequisite not done nowadays by anyone, credit where its due.

thank you so much for the pics!!! I have never seen them!!! jejejeje!! I would like to go Wehls master in octuber... Please could you tell me some competition in uk where it is worthwhile going!!! I can not go to portugal and Birmingham... thank you so much!!!

Juan

simply fantastic!!! congrats to the owner!!

Juan

PD. everytime that I shoot with it, it is a pleasure!! thank you brian and jon!!

Yep, that one.
Told him he'd love it.
P.S. Looks like the scope rail is still on the wrong way.
Ben

Pretty extortionate at £3133 when can buy same 6J rifle without sight set, shipped +MEC tube delivered for £2133
Then have palm shelf to sell £150+

Yes Ben it's always on the scope specially now the winter sun is so low. At 60 mag it suits me

nice! :)

Like most European stuff with a couple of exceptions the action is in two parts bolted together.
Like most European producers front and rear dovetails are different and also on a different height.

Not up to The Guru's standard, but the cheek piece extensions are now installed, and it is working very well.

DSC_0074.jpg

Yes, I know one of the threads could do with dressing off some more and one of the nuts has some grime on it, but I was keen to try it.

I would try the P800X stock Neil, like yourself I am an avid hater of aluminium production stocks designed for another discipline. Theyre not bad at all quite usable in standard fashion, once setup you will wonder why the so called made to measure stocks producers have been pulling the wool over...

PRICE EURO 2415

SHIPPING TO UK EURO 39

7 1/8 inch dovetail cut, and 3 open cut for mounting base, Total cut 10 1/8 inches.