The 800 pimping process is not over but it's time to test it in the field.

Here's my Fein with some custom made parts. The most important is the riser that I designed myself, with rock solid rings. You can also see a custom made 3D printed resettable turret, a Garima magnetic wheel, a custom made...

credit:

Hi all,

Finally unboxed my P70 - looks to be not a factory FT model but a 10m gun that was converted by the Omictin/Lake breech mod. Titanium tube - nice gun.

Notice though that the action essential pivots a bit in the stock. It only bolts to the stock in two places. The collar around the air...

So I just purchased my first FWB air rifle. I picked up a used P70 FT and now I am anxiously awaiting for it to arrive. Seller said it's like new, he hardly used it and has kept it in a gun safe.

Since I have no experience with these guns (my only other air gun is a Benjamin Marauder) I have no...

....to brand my steaks a lot faster :mrgreen: and the bottom brand goes into the coals....to brand the rear butt cheek of my cow at the farm :lol: :lol: :lol:

from:

See them wooden utensils in pot in background ? well, the handle was thin & long enough for me to insert inside the steel sleeve tube, in order to gauge where the actual barrel ends.

PRESTO ! Scotch tape & black marker pen...That gives you now an idea, relative to the whole rifle.

The...

...found this for sale on Italian website & noticed ...custom made 1 piece scope rail...mmm...

Will they suffer from the POI issues of the 800x? Now that I've discovered Krale Sport in the Netherlands it's tempting to see if they could get that model. Or the FT action in alu. Looks like they only carry the 10m models. Don't have the money for the Jon Harris pimp (nor a good way to get it to...

Ordered from Herr Christian Baur (details below)

Will mount the action from the L/H Fwb800X Jon Harris gun Nbr. 2 that I own... :mrgreen:

SCHÜTZENBEDARF BAUR
Inh. Sandra Baur
Ina-Seidel-Str. 2
84513 Töging am Inn

Tel. 08631-1660308 (Mo-Fr, 14-17 Uhr)

E-Mail: info@schuetzenbedarf-baur.com...

Credit:

----------

Company Feinwerkbau Westinger & Altenburger GmbH was founded shortly after the Second World War in 1951 by former employees of the company lords Mauser Charles Westingerem and Ernst Altenburger. Initially the company manufactured precision components for several...

Long & short barreled versions ...Spot the other differences ? a benchrest stock and the 800 Alu stock (instead of the X)

So I presume Feinwerkbau agreed to do these swap arounds at factory level, only on basis - this is for the ITALIAN market for their agent Domino ...

An old FWB P70 of a mate of mine.

I replaced the tired alloy one with a replacement titanium one; used the original ends to keep the cost down, but i could have fitted a quick fill if required.

Other pics. album:

Not at the IWA but at the European Championship Air Rifle and Air Pistol in Arnhem, The Netherlands -

The Feinwerkbau representatives / service mechanics had a leaflet of the new wooden stock for the FWB 800. The 800W. Not the rifle in real life, I'm sure that one is at IWA.

Seems that...

Bought a new Aluminum stock for my 16J converted Feinwerkbau P70.

More info here (all the way down):

The Fwb 800W is NOT even on the website as I type this :o

So, Knappworst...

1) Cant vouch for these guys (never bought from them)

2) Dont know if they send to UK

3) Bogdan Kimla - would/can obtain this & send to UK (reputable chap 10/10 & met face to face at IWA 2015 at Fwb stand; what a laugh...

credit:

YES- interchangeable ; have yet to do but as I know these guns intimately, you can play around & customise using different components - Front, Middle & rear sections of the stock (shaft)

See this...

Found those haven't contact the store but 100gr lighter than the original cylinder is strange when the size is the same and FWB are very light compared to other makers who use less aluminium parts.

credit: josef1000 >>>

:!: IMPORTANT: you would need a COMPETENT gunsmith to install it for you. Or do at your peril :!:

Hello,

On Feinwerkbau parts for quick fill I have is something similar to Steyr, how we once wrote, only here it is in the cartridge thread.

However, to make it as the...

credit:

One frozen P800 testing zero shift. Had to scrape the ice of scope lenses for 20 mins. - JH

:o :shock: :D

Seeing this pic for first time...I suspect...(perhaps not ?) this was my Fwb800 Jon did testing on :?: AWESOME :mrgreen:

...HOT off the Press...

:D :D :D :D :D :D :D :D

Courtesy of:

First of all a big thank you to Jon Harris , without who's skill this would never of come about.
He allso put up with all my phones calls and crackpot ideas , some of the things we kicked about
turned out good , some others not so good including some coatings.
End result is a fantastic looking...

Thought I better post pics before anyone else does it.

14mm high rail fixed off front block, all other mods as per the fully blown FT except cheek raiser.

Have harrassed Fwb to sell these as bread & butter items...

Via Bogdan Kimla, they are saying: FWB has got already a lot of requests for this bi-pod. They wait quietly for an answer from the producer (FWB does not produce them) .

So its a waiting game.

But hey ! at least I asked & persisted...

Got it at home .

Well impressed ... .

Who's the Daddy .
You lucky luck people , feast your eyes on this .
Going to be in my grubby little paws Thursday next week.
More pimped than anything before
.177 , already bean offered a staggering amount for it .
There are so so so many things going on here , maybe Pimpmaster Guru Jon , will do...